Filter
Top Products
19
Operating the built-in answering device
2When receiving a call, a greeting message will be
played and the unit will record a voice message.
●
To record your own greeting message, see page 18.
Activating the answering device
Operating the answering device
from a remote location
1Turn the (Auto answer) light on by pressing .
Listening to recorded messages
When new messages are recorded, the (Auto
answer) light will flash.
1Press to listen to the recorded messages.
Listening to all of the recorded
messages
Erasing all of the recorded
messages
1Press (Menu) and .
2Press (Stop).
Erasing your own greeting
message
2Press (Stop).
●
The pre-recorded Japanese greeting message will
be played when you receive a call.
Preparation: Programming the remote operation ID
1. Press (Menu) and .
2. Enter any 4-digit number (remote operation ID) except
or #.
3. Press (Set).
4. Press (Stop).
Operation: Listening to a recorded message from a
remote location
Turn the (Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Press during the greeting message, then enter
the remote operation ID and .
3. Press
.
●
The recorded messages will be played back.
1Press (Menu) and .
Press (Replay/Record).
2To erase the messages, press (Set) within
10 seconds after playing back.
To save the messages, press (Stop).
To erase all the recorded messsages, press
.
To stop playing back, press (Stop).
While a message is played back, the following
operations are available:
To listen to the next message, press
(right).
To listen to the previous message, press
(left).
To play back faster, press .
To play back slowly, press .
To erase the message being played back, press
.