Filter
Top Products
Feature/Code Selection
Setting dial keypad entry
restriction
MBNM4NM2NM1N
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: If you do not wish to dial a fax number manually using the dial keypad,
activate this feature.
Note:
R If you select “ON”, you cannot make redial calls to fax numbers entered
using the dial keypad.
R If you select “ON”, the fax number re-entry setting (feature #422 on
page 52) will be deactivated.
Setting the fax number
re-entry before sending
MBNM4NM2NM2N
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press MStartN. When the 2nd entry number matches
the 1st entry number, you can send the fax.
Activating the Distinctive
Ring feature
MBNM4NM3NM0N
M0N “OFF” (default)
M1N “ON”
See page 44 for details.
Setting the ring pattern for fax
(Distinctive Ring feature)
MBNM4NM3NM1N
M1N “A”
M2N “B”
M3N “C”
M4N “D”
M5N “B-D” (default)
See page 44 for details.
Setting auto reduction
feature
MBNM4NM3NM2N
To receive a fax document that is longer than your recording paper.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
MBNM4NM3NM4N
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
R The fax activation code must be different from the code that you
programmed on the answering machine.
M0N “OFF”
M1N “ON” (default)
1. MMenuN A MBNM4NM3NM4N
2. Press M1N to select “ON”. A MSetN
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN.
R The default code is “H#9”.
4. MSetN A MMenuN
Setting the memory reception
alert
MBNM4NM3NM7N
To alert you with a beeping sound when a received fax document is stored into
memory.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 60 to page 61 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
52
9. Programmable Features