Filter
Top Products
15
Operating the built-in answering device
2When receiving a call, a greeting message will be
played and the unit will record a voice message.
●
To record your own greeting message, see page 14.
light on/flash
Activating the answering device
1Turn the light on by pressing .
Listening to recorded messages
When new messages are recorded, the light will
flash.
Press to listen to recorded messages.
After the messages are played back, the following will be
displayed.
■
To erase the messages, push .
■
To save the messages, push
.
Listening to all of the recorded
messages
Press .
After the messages are played back, the following will be
displayed.
■
To erase the messages, push .
■
To save the messages, push
.
Erasing a specific message
Press twice while listening to the message you want
to erase.
Erasing all of the recorded messages
1Press .
2Press .
Operating the answering device
from a remote location
Preparation: Programming the remote operation ID
1. Press .
2.
Press .
3. Enter any 4-digit number (remote operation ID) except
or #.
4. Press .
5. Press .
Operation: Listening to a recorded message from a
remote location
Turn the light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press or wait 4 seconds.
●
Only the new recorded messages will be played
back.
●
To listen to all the recorded messages, press
after the new messages have been played back.
4
2
Example :
light on