Filter
Top Products
44
When the unit runs out of ink film, the following message will be displayed.
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ｺｳｶﾝｼﾃｸﾀﾞｻｲ
U23
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ﾋﾝﾊﾞﾝ:
K X
-
F AN190
Install a new ink film.
Installations and connections
Installing the ink film
1 Open the control panel.
2 Open the back cover.
4 If the ink film is slack, tighten it by
winding this gear (
orange)
.
3 Insert the ink film.
Insert the orange
gear
into the left slot
of the main unit.
Insert the white gear into the right slot
of the main unit.
5 Close the back cover pressing
“ ” down on both sides
until it clicks into place.
6 Close the control panel.
Replacement ink film:
KX-FAN190 (15 m) ￥714
KX-FAN190W (15 m X 2) ￥1,208
KX-FAN191 (15 m) (*1) ￥893
KX-FAN191W (15 m X 2) (*1) ￥1,523
・As of August 2008. ・Tax included.
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.