Filter
Top Products
16
Operating the built-in answering device
2 When receiving a call, a greeting message will be
played and the unit will record a voice message.
●
To record your own greeting message, see page 15.
1
2
3
4
5
6
7
8
9
0
light on/flash
1
2
3
4
5
6
7
8
9
0
light on
Activating the answering device Operating the answering device
from a remote location
1 Turn the (Auto answer) light on by pressing .
Listening to recorded messages
When new messages are recorded, the (Auto
answer) light will flash.
Press to listen to recorded messages.
Listening to all of the recorded
messages
Press (Replay).
Erasing a specific message
1 Press (Erase) while listening to the message
you want to erase.
2Press .
Erasing all of the recorded messages
1Press
(Record)
.
2Press (Start), then press .
Erasing your own greeting message
2Press (Start) and press .
●
The pre-recorded Japanese greeting message will
be played when you receive a call.
Preparation: Programming the remote operation ID
1. Press (Function).
2. Press .
3. Enter any 4-digit number (remote operation ID) except
or #.
4. Press (Register).
5. Press (Stop).
Operation: Listening to a recorded message from a
remote location
Turn the (Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press or wait 4 seconds.
●
Only the new recorded messages will be played
back.
●
To listen to all the recorded messages, press
after the new messages have been played back.
4
2
1
Press (Record) and rotate the (Search dial)
until the following is displayed.