Filter
Top Products
10
Automatic dialing on the main unit
1
2
3
4
5
6
7
8
9
0
Handset
Storing names and telephone
numbers in the search dial
Making a voice call using the
search dial
1 Press (Phonebook).
●
“XXX” shows the
remaining station numbers
you can store.
●
You can program up to
150 stations, including 5
pre-programmed stations.
1 Rotate the (Search dial) until the desired name
is displayed.
2 Enter the name, up to 12 characters (see the table on
page 9 for instructions).
3 Press (Register).
2Lift the handset or press (Speakerphone).
4Enter the telephone number, up to 30 digits.
●
To correct a mistake, press (Clear).
5 Press (Register).
6If necessary, enter the group number (1–9).
7 Press (Register).
●
To program other items, repeat steps 2–7.
8 Press (Stop) to exit the program.
Editing a stored name or number
1 Rotate the (Search dial) until the desired name
is displayed.
2 Press (Phonebook).
●
If you do not need to edit the name, skip to step 4.
3 Edit the name (see the table on page 9 for
instructions).
4 Press (Register).
●
If you do not need to edit the telephone number,
skip to step 6.
5Enter the correct telephone number.
6 Press (Register).
●
If you do not need to change the group number,
skip to step 8.
7 If necessary, enter the correct group number.
8 Press (Register).