Panasonic KX-THA14 Network Card User Manual


 
Introduction
8 For assistance, please visit http://www.panasonic.com/phonehelp
For best performance
Location
This unit communicates using radio
waves.
For maximum distance and noise-free
operation, we recommend the following:
LPlacing the product away from electrical
appliances.
LRaising the antenna vertically.
Environment
LKeep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
LThe product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
LThe product should not be exposed to
direct sunlight.
LDo not place heavy objects on top of the
product.
LWhen you leave the product unused for
a long period of time, disconnect the
product from the computer.
LThe product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 5 °C (41 °F) or greater than 40 °C
(104 °F). Damp basements should also
be avoided.
LThe maximum data transferring distance
may be shortened when the product is
used in the following places: Near
obstacles such as hills, tunnels,
underground, near metal objects such
as wire fences, etc.
LOperating near 2.4 GHz electrical
appliances may cause interference.
Move away from the electrical
appliances.
Connections
LUse only the included extension cable.
Other extension cables may damage the
USB adaptor and your computer.
LConnect the USB adaptor to a USB port
on your computer. For optimum
performance, do not connect more than
one USB adaptor to a single computer or
the USB adaptor to your computer via a
hub.
LThe USB adaptor may not turn off and
may consume electricity regardless of
whether your computer is turned off or in
sleep mode. By connecting/
disconnecting the USB adaptor or
extension cable from an active
computer, the USB adaptor will turn on/
off. We recommend when you are not
using the USB adaptor or computer, that
you disconnect the USB adaptor or
extension cable from your computer.
Routine care
LWipe the outer surface of the product
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
THA14(e).book Page 8 Tuesday, March 7, 2006 5:31 PM