Filter
Top Products
22
For rapid access to frequently dialed numbers, the unit provides 12 entries for one-touch dial.
●
Stations 1 to 3 can be used alternatively as broadcast keys (p. 34).
1
Press p repeatedly until the following
is displayed.
Display:
/
2
For stations 1–3:
Press one of the station keys.
Example:
Press w to go to the next prompt.
For stations 4–6:
Press one of the station keys.
For stations 7–12:
Press o, then press one of the station
keys.
3
Enter the name, up to 10 characters (see
page 19 for instructions).
Example:
4
Press w.
Example:
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
●
If you want to enter a hyphen, press
k.
6
Press w.
!
/
●
To program other entries, repeat steps 2 to 6.
7
Press { to exit the program.
DIRECTORY SET
PRESS NAVI.[
IH
]
DIRECTORY SET
PRESS STATION OR
REGISTERED
<S01>
=1114497
<S01>
=
NAME
=John
STORE:PRESS SET
STATION 1
DIAL MODE [±]
DIRECTORY SET
PRESS NAVI.[
IH
]
DIRECTORY SET
PRESS STATION OR
Helpful hint:
●
You can confirm the stored entries on the
telephone number list (p. 75).
Note:
●
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
●
Press ( or ) to move the cursor to the
incorrect character/number, and then make
the correction.
To delete a character/number
●
Move the cursor to the character/number you
want to delete, and press {.
Storing names and telephone numbers
into one-touch dial!
Station keys
(Delete)
STOP
SET
MENU
(Hyphen)
FLASH
LOWER
Automatic Dialing