Filter
Top Products
Basic Operation
Remote control operation
ENGLISH - 28
You can enlarge the projected image down
to a centered area for emphasizing within
the range of 1x to 2x.
Q Enlarging the image
1. Press DIGITAL ZOOM +/- once.
The centered area of the image will then be enlarged
to 1.5x.
2. Adjust the image size by pressing DIGITAL ZOOM
+/-.
The image size will be changed in steps of 0.1.
Q Shifting the center point
Press F G I H to shift the center point.
You can control the volume of the built-in
speakers and output sound. Press +/- to
control the volume.
Enlarging the centered area
NOTE:
• When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK
in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 35.
• When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.
Controlling the volume of the speaker
NOTE:
• Power consumption can be reduced if the volume level
is lowered.