Panasonic PT-D10000E Projector User Manual


 
Panasonic's new technologies improve
reliability and installation ease
578
643
1051
320
428
753
(mm)
Minimal downtime, high efficiency, and a bright picture.
MULTI-LAMP OPTICAL SYSTEM
With Panasonic's original four lamp
system, the PT-D10000E generates
10,000-lumen brightness. If one
lamp burns out during operation, the
remaining lamps provide plenty of
light to continue projecting. A lamp
relay mode is also included.
Extended, continuous operation is
possible by lamp mode selection.
Provides 2,000 hours of use without filter maintenance.
AUTO CLEANING ROBOT (ACR)
The PT-D10000E is the world's first*
1
projector with an
automatic filter cleaning system. When you switch on the
projector*
2
, the air filter operates and the brush of the auto
cleaning "robot" removes dust from the filter. This prevents the
clogging results in malfunctions and other problems.
*1 As of Decemder, 2006. *2 When using the timer, you cannot set the filter
to be cleaned more than once every 24 hours. Cleaning occurs either when
the system is switched on or when it is cooling down when the specified
cleaning time comes. The timer can be set to any time between 00:00 and
23:50 in 10-minute increments. You can also manually clean the filter using
the menu on the on-screen display. *3 Individual lint particles and pollen
are examples of dust with a size of 10 microns.
Dramatically reduced the size, weight and volume.
1/2 CONCEPT
Panasonic's new liquid-cooling system made it possible to significantly
downsize the PT-D10000E, making it one of the most compact in its class.
The size is 30% smaller than our previous model*, and the weight and
volume are 70% less than our previous model*. The PT-D10000E also
offers flexible installation and is easy to operate.
* PT-D9510/PT-D9610
Air filter
Rear side of the filter tray
Panasonic
Original
Panasonic
Original
Lamp replacement cycle and
brightness guidelines
A new filter in the air intake section traps dust
particles that are 10 microns*
3
or larger. By
capturing approximately 7 times as much dust
as our previous filters, it guards against optical
blocks and reduces the penetration of dust into
to the interior to provide stable operation by, for
example, preventing drops in brightness.
ACR brush
*The values above are maximum values when replacing all four
lamps simultaneously. The hours may vary depending on the
usage conditions. See the back page for details.
Four lamps
Three lamps
Two lamps
One lamp
Lamp mode
10,000
7,500
5,000
2,500
2,000
3,000
4,000
8,000
Light output
(lumens)
Lamp replacement
cycle (hours)
World's Smallest
10,000-Lumen DLP
Projector*
*As of December, 2006
Micro cut filter
Weight
Dimensions
Volume
Power
consumption
100 kg
W 753 mm x H 428 mm x D 1051 mm
0.33 m
3
32 kg
W 578 mm x H 320 mm x D 643 mm
0.11 m
3
2,200 W 1,450 W
PT-D9510/PT-D9610 PT-DW10000E