Filter
Top Products
S PEC F ILE
PT-D4000
DLP
™
Projectors
As of May 2007 < 12 >
Parameter format
Parameter format Size (Byte) Difinition
<pl>
<off on>
<input signal>
<installation>
<language>
<power condition>
<lamp on time>
<lamp select>
<acctch>
<color temp>
<date>
<time>
3 (1 or 2 bytes also
possible when
under control)
1
3
1
3
3
4
1
4
2
9
6
Dicimal without signs: 0-999 (000, 001, 002...999)
Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)
Callback from the projector is 3 Byte.
0 = off, 1 = on
RG1 = computer 1, RG2 = computer 2, VID = video, SVD = S-Video,
DVI = DVI
0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear
ENG = English, DEU = German, FRA = French, ESP = Spanish,
ITL = Italian, JPN = Japanese, CHI = Chinese, RUS = Russian, KOR = Korean
000 = standby power off, 001 = standby power on
Decimal without signs: 0000-9999 hours
0 = dual, 1 = single, 2 = lamp 1, 3 = lamp 2
Decimal without signs: 0000-9999 hours
1 = mid, 2 = high, 4 = user, 10 = default
y1y2y3y4m1m2d1d2w = year (y) month (m) day (d) day of week (w)
Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7
h1h2m1m2s1s2 = hour (h) minute (m) second (s)
Command example
To set the on-screen display off, send the command as shown below.
ADZZ OOS : 30; ETX
ID Address Command
STX
Start Parameter End
NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.
NOTE: When sending commands without parameters, a colon (:) is not necessary.