Filter
Top Products
4
- ENGLISH
Important
Information
Preparation Getting Started Basic Operation Settings Maintenance Appendix
The size is almost the same as the
former model but the luminance is
about 1.5 times higher.
7 000 lm : PT-D7700U
(two lamps LAMP POWER : [HIGH])
10 600 lm : PT-DZ8700U
(two lamps LAMP POWER : [HIGH])
The lamp replacement cycle is longer
than the existing model. (
Æ
page 110)
Approx. 1 500 hours : PT-D7700U
(two lamps LAMP POWER : [HIGH])
Approx. 3 000 hours : PT-DZ8700U
(two lamps LAMP POWER : [HIGH])
The standby power is much less than
the existing model.
Approx. 12 W : PT-D7700U
Approx. 0.2 W : PT-DZ8700U
(STANDBY MODE : [ECO])
Heightened luminance
Lengthened lamp
replacement cycle
Reduced standby power
J
Quick steps
For details, see the corresponding pages.
1. Set up your projector.
(
Æ
page 21)
2. Attach the projection lens.
(
Æ
page 37)
3. Connect with other devices.
(
Æ
page 34)
4. Connect the power cord.
(
Æ
page 38)
5. Start projecting.
(
Æ
page 39)
6. Select the input signal.
(
Æ
page 41)
7. Adjust the image.
(
Æ
page 41)