Filter
Top Products
®
Please contact Panasonic or your dealer for a demonstration.
http://panasonic.net/avc/projector
For more information about Panasonic projectors ––
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
This product may be subject to export regulations.
An application has been filed for trademark rights, or trademark rights have been granted,
for PJLink in Japan, United States of America and other countries and area.
All other trademarks are the property of their respective trademark owners. Projection Images simulated.
DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments.
(C) 2009 Panasonic Corporation All rights reserved.
All information included here is valid as of July 2009.
PT-DZ6700E2-09July Printed in Japan.
JQA-0443
EC98J2010
Optional accessories
Projection distance
Throw distance
50"
80"
100"
150"
200"
300"
400"
500"
600"
50"
80"
100"
150"
200"
300"
400"
500"
600"
With ET-DLE150
1.3-1.9:1
1,376mm
4.6'
2,234mm
7.4'
2,806mm
9.3'
4,236mm
13.9'
5,666mm
18.6'
8,526mm
28.0'
11,386mm
37.4'
14,245mm
46.8'
17,105mm
56.2'
2,013mm
6.7'
3,251mm
10.7'
4,076mm
13.4'
6,139mm
20.2'
8,202mm
27.0'
12,327mm
40.5'
16,453mm
54.0'
20,579mm
67.6'
24,704mm
81.1'
Screen size (16:10)
Screen size (16:9)
Diagonal
image
size
min. max.
With supplied lens
1,901mm
6.3'
3,086mm
10.2'
3,876mm
12.8'
5,851mm
19.2'
7,827mm
25.7'
11,777mm
38.7'
15,728mm
51.7'
19,679mm
64.6'
23,629mm
77.6'
2,571mm
8.5'
4,158mm
13.7'
5,215mm
17.2'
7,860mm
25.8'
10,504mm
34.5'
15,793mm
51.9'
21,082mm
69.2'
26,371mm
86.6'
31,660mm
103.9'
min. max.
With ET-DLE250
2.3-3.6:1
2,418mm
8.0'
3,916mm
12.9'
4,915mm
16.2'
7,413mm
24.4'
9,910mm
32.6'
14,905mm
49.0'
19,900mm
65.3'
24,895mm
81.7'
29,890mm
98.1'
3,865mm
12.7'
6,232mm
20.5'
7,810mm
25.7'
11,754mm
38.6'
15,699mm
51.6'
23,588mm
77.4'
31,477mm
103.3'
39,366mm
129.2'
47,255mm
155.1'
min. max.
With ET-DLE350
3.6-5.4:1
3,802mm
12.5'
6,164mm
20.3'
7,739mm
25.4'
11,676mm
38.4'
15,613mm
51.3'
23,487mm
77.1'
31,361mm
102.9'
39,235mm
128.8'
47,109mm
154.6'
5,815mm
19.1'
9,384mm
30.8'
11,764mm
38.6'
17,713mm
58.2'
23,662mm
77.7'
35,560mm
116.7'
47,458mm
155.8'
59,356mm
194.8'
71,255mm
233.8'
min. max.
With ET-DLE450
5.4-8.6:1
5,659mm
18.6'
9,235mm
30.3'
11,619mm
38.2'
17,579mm
57.7'
23,539mm
77.3'
35,460mm
116.4'
47,380mm
155.5'
59,300mm
194.6'
71,221mm
233.7'
With
ET-DLE055
0.8:1
828mm
2.7'
1,353mm
4.5'
1,703mm
5.6'
2,578mm
8.5'
3,454mm
11.4'
—
—
—
—
—
—
—
—
9,123mm
30.0'
14,777mm
48.5'
18,546mm
60.9'
27,968mm
91.8'
37,391mm
122.7'
56,236mm
184.6'
75,081mm
246.4'
93,926mm
308.2'
112,771mm
370.0'
1,416mm
4.7'
2,298mm
7.6'
2,885mm
9.5'
4,355mm
14.3'
5,825mm
19.2'
8,764mm
28.8'
11,704mm
38.4'
14,643mm
48.1'
17,582mm
57.7'
2,070mm
6.8'
3,343mm
11.0'
4,191mm
13.8'
6,311mm
20.8'
8,431mm
27.7'
12,671mm
41.6'
16,912mm
55.5'
21,152mm
69.4'
25,393mm
83.4'
1,956mm
6.5'
3,174mm
10.5'
3,986mm
13.1'
6,016mm
19.8'
8,046mm
26.4'
12,107mm
39.8'
16,167mm
53.1'
20,228mm
66.4'
24,288mm
79.7'
2,645mm
8.7'
4,275mm
14.1'
5,362mm
17.6'
8,080mm
26.6'
10,798mm
35.5'
16,234mm
53.3'
21,670mm
71.1'
27,106mm
89.0'
32,542mm
106.8'
2,487mm
8.2'
4,027mm
13.3'
5,054mm
16.6'
7,621mm
25.1'
10,188mm
33.5'
15,322mm
50.3'
20,456mm
67.2'
25,590mm
84.0'
30,723mm
100.8'
3,975mm
13.1'
6,407mm
21.1'
8,029mm
26.4'
12,083mm
39.7'
16,137mm
53.0'
24,246mm
79.6'
32,354mm
106.2'
40,462mm
132.8'
48,571mm
159.4'
3,911mm
12.9'
6,339mm
20.8'
7,958mm
26.2'
12,004mm
39.4'
16,051mm
52.7'
24,144mm
79.3'
32,236mm
105.8'
40,329mm
132.4'
48,422mm
158.9'
5,980mm
19.7'
9,649mm
31.7'
12,094mm
39.7'
18,209mm
59.8'
24,323mm
79.8'
36,552mm
120.0'
48,781mm
160.1'
61,010mm
200.2'
73,239mm
240.3'
5,824mm
19.2'
9,500mm
31.2'
11,950mm
39.3'
18,076mm
59.4'
24,202mm
79.5'
36,454mm
119.6'
48,706mm
159.8'
60,957mm
200.0'
73,209mm
240.2'
852mm
2.8'
1,392mm
4.6'
1,752mm
5.8'
2,651mm
8.7'
3,551mm
11.7'
—
—
—
—
—
—
—
—
9,385mm
30.8'
15,196mm
49.9'
19,070mm
62.6'
28,754mm
94.4'
38,439mm
126.2'
57,808mm
189.7'
77,177mm
253.3'
96,546mm
316.8'
115,915mm
380.3'
min. max.
NOTES ON USE
Lens
Lamp Ceiling mount bracket
Zoom lens
ET-DLE150
(1.3 – 1.9:1)
Zoom lens
ET-DLE250
(2.3 – 3.6:1)
Zoom lens
ET-DLE350
(3.6 – 5.4:1)
Zoom lens
ET-DLE450
(5.4 – 8.6:1)
Fixed focus lens
ET-DLE055
(0.8:1)
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
Replacement lamp unit
ET-LAD60
ET-LAD60W (twin pack)
Filter
Replacement filter unit
ET-ACF100
ET-PKD56H
ET-PKD55S
Dimensions
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock.
2.
The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions.
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm (1.64 feet) or more around the projector's exhaust openings.
•
Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space
indicated between them. These space requirements also apply to installation where only one projector unit is operating atone time and the other unit is used as a backup.
•
If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 ˚C (32 ˚F) and 40 ˚C (104 ˚F). Also make sure the projector's
intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings.
* Even when the ambient temperature near the intake opening is 40 ˚C (104 ˚F) or lower, an accumulation of hot air inside the cabinet may cause the protective circuit to activate
and shut down the projector. Please give ample consideration to the design with regard to ambient temperature conditions.
4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's alternating lamp operation (lamp changer) function. The projector cannot
be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per lamp if using the dual-lamp mode.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
•
The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
498 (19-19/32)
432 (17)
440 (17-5/16)
175 (6-7/8)
Specifications
Power supply
Power consumption
DLP
™
chip Panel size
Display method
Pixels
Lens
PT-DZ6710E/DZ6700E
PT-DZ6710EL/DZ6700EL
Lamp
Screen size
Brightness*
2
Centre-to-corner uniformity*
2
Contrast*
2
Resolution
Scanning RGB / DVI-D
frequency
YPBPR (YCBCR)
S-Video / Video
Optical axis shift
Keystone correction range
Installation
Terminals*
5
HD/SD-SDI IN
DVI-D IN
RGB 1/YPBPR IN
RGB 2/YPBPR IN
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
Power cord length
Cabinet material
Dimensions
PT-DZ6710E/DZ6700E
(W x H x D)
PT-DZ6710EL/DZ6700EL
Weight*
6
PT-DZ6710E/DZ6700E
PT-DZ6710EL/DZ6700EL
Operating temperature
Operating humidity
Supplied accessories
Models
PT-DZ6710E/DZ6710EL
220–240 V AC 50/60 Hz
800 W (960 VA), Standby mode eco
*
1
: 0.3 W
Standby mode normal: 9 W (Both with fan stopped)
0.67˝ diagonal (16:10 aspect ratio)
DLP
™
chip x 1, DLP
™
system
2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels
Powered zoom/focus lenses (1.8–2.4:1), F 1.7–2.0, f 26.8–35.7 mm
Optional powered zoom/focus lenses
300 W UHM lamps (x 2) (dual-lamp system)
50–600 inches (50–200 inches with the ET-DLE055), 16:10 aspect ratio
6,000 lumens (dual-lamp, high power mode)
90%
2,000:1 (full on/full off, contrast mode: high)*
3
1,920 x 1,200 pixels
Horizontal: 15–91 kHz, Vertical: 50–85 Hz, Dot clock: 162 MHz or lower
525i (480i), 625i (576i), 525p (480p), 625p (576p),
750 (720)/60p,
750 (720)/50p, 1035/60i, 1125 (1080)/60i, 1125 (1080)/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60p, 1080/50p
Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz,
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Vertical: +50% (powered), horizontal: ±10% (powered)
Vertical: ±40° (±30° with the ET-DLE055)*
4
Ceiling/floor, front/rear
DVI-D 24-pin
BNC x 5
D-sub HD 15-pin
BNC
Mini DIN 4-pin
D-sub 9-pin (RS-232C compliant)
D-sub 9-pin
M3 jack
M3 jack
D-sub 9-pin
RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink™
3.0 m (9´10˝)
Molded plastic
498 mm x 175 mm x 440 mm (19-19/32˝ x 6-7/8˝ x 17-5/16˝) (with supplied lens)
498 mm x 175 mm x 432 mm (19-19/32˝ x 6-7/8˝ x 17˝) (without lens)
Approx. 16.0 kg (35.3 lbs) (with supplied lens)
Approx. 15.2 kg (33.5 lbs) (without lens)
0–45 °C (32–113 °F)
20–80 % (no condensation)
Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope
*1 During eco standby mode operation, network functions such as standby-on from a LAN network and the serial output terminal will
not operate. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Brightness: 3,000 lumens *4 PT-DZ6710E/DZ6710EL: When using only the KEYSTONE correction of the Geometric Adjustment
function, keystone range: vertical ±40°, horizontal ±15° (vertical ±30° and horizontal ±15° with the ET-DLE055). When using both
the KEYSTONE and CURVED corrections of the Geometric Adjustment function, keystone range: vertical ±5°, horizontal ±5° (vertical
±10° and horizontal ±10° with the ET-DLE350, and vertical ±10° and horizontal ±15° with the ET-DLE450). *5 The HD/SYNC and
VD inputs do not accept the tri-level sync signal. *6 Average value. May differ depending on models.
PT-DZ6700E/DZ6700EL
BNC —
unit: mm [inch]
Factories of Systems Business Group have received
ISO14001:2004-the Environmental Management
System certification. (Except for 3rd party's peripherals.)