Filter
Top Products
About Your Projector
ENGLISH -
23
Preparation
Rear terminals
(1) Remote control signal receiver
(Back)
The infrared remote receiver is also located in the
front and top
.
(2)
LAN
Connect the LAN cable.
(3)
MONITOR OUT
This terminal can be used to output the incoming
analog RGB signal from INPUT 1-3 terminals to the
other monitor
.
(4)
RGB
Connect the computer (or RGB scart) output signal to
this terminal.
(5)
AUDIO IN 1
Connect the audio output (stereo) signal from a
computer or video equipment to INPUT 1 terminals.
(6)
REMOTE IN
When using the wired remote control, connect the
wired remote control to this jack with a remote control
cable (not supplied).
(7)
HDMI
Connect the HDMI signal (including sound signal)
from video equipment or the DVI signal from computer
to this terminal.
(8)
DVI-D
Connect the computer output digital signal to this
terminal. The HDTV (HDCP compatible) signal can
also be connected
.
(9)
INPUT 2
Connect the component or composite video output
signal from video equipment to VIDEO/G/Y, and R/
PR jacks or connect the computer output signal (5
BNC Type [Green, Blue, Red, Horiz. Sync, and Vert.
Sync.]) to VIDEO/G/Y, B/Pb, R/PR, SYNC/HD, and VD
jacks.
(10)
S-VIDEO
Connect the S-VIDEO output signal from video
equipment to this jack.
(11)
VIDEO
Connect the component or the composite video
output signal from video equipment to these jacks.
(12)
AUDIO IN 2
Connect the audio output (stereo) signal from 5 BNC
INPUT jacks (INPUT 2 jacks).
(13)
AUDIO IN 3 (L/R)
Connect the audio output (stereo) signal from video
equipment connected to INPUT 3 jacks. For a
monaural audio signal (a single audio jack), connect
it to the L jack.
(14)
VARIABLE AUDIO OUT
This jack outputs the audio signal to external audio
equipment.
(15)
SERIAL IN
When controlling the projector with RS-232C,
connect the control equipment to this connector with
the serial control cable.
(16) Security slot
This slot is for a Kensington lock used to deter theft
of the projector.
* Kensington is a registered trademark of ACCO
Brands Corporation.
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
(6)
(4)
(1) (2) (3)
(5)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)