Filter
Top Products
Setting
ENGLISH -
71
Settings
Filter counter
This function is used to set a frequency for the lter
replacement.
Press ▲▼ to select [Filter counter].1 )
Press ► or the <ENTER> button to 2 )
access the submenu items.
Filter counter
J
Show the total accumulated time of the lter use timer
setting.
Filter counter remaining
J
The remaining time for the lter counter is displayed
in units of 10%.
This is displayed in red when the remaining time is 10%.
z
Filter counter timer
J
To set a timer. When the projector reaches the
selected time the lter warning icon appears on the
screen.
Press ▲▼ to select [Filter counter 1 )
timer] and then press the <ENTER>
button.
Press ▲▼ to set the timer. 2 )
Select from [Off/1000H/2000H/3000H/
z
4 000H/6000H/8000H/9000H/12000H]
depending on the use environment.
The situation which different icons appear as
z
below shown:
When the remaining time is less
than
10%
.
When the remaining time is 0, the
lter replacement is necessary.
When the projector reaches
a time set by user in the timer
setting.
Filter counter reset
J
After replacing the lter, be sure to reset the timer.
Press ▲▼ to select [Filter counter 1 )
reset].
Press the <ENTER> button. 2 )
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another conrmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Test pattern
Results of adjustment of the position , size and other
factors are not reected in test patterns. Ensure the
input signal is displayed before performing various
kinds of setting.
Press ▲▼ to select [Test pattern].1 )
Press ► or the <ENTER> button to 2 )
access the submenu items.
Press ▲▼ to go backwards and 3 )
forwards between test patterns as
below.
[Color], [Gradation 1], [Gradation 2],
z
[Gradation 3], [Gradation 4], [All white], [All
black] and [Cross].
Note
Even while the test pattern is displayed, the zoom,
z
focus, lens shift, shutter, and power off functions
take priority.
Factory default
This function returns all setting values except for [PIN
code lock], [Logo PIN code lock] and [Filter counter]
to the factory default settings.
Press ▲▼ to select [Factory default].1 )
Press the <ENTER> button.2 )
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another conrmation dialog
box appears, select [Yes] to return to [Factory
default].