Filter
Top Products
S PEC F ILE
PT-LB51S
Micro-Portable Wireless LCD Projector
As of October 2008 < 10 >
Notes on Projector Placement and Operation:
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is an unobstructed space of 150 mm (5-29/32˝) or more around the projector’s
exhaust openings.
3. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the
projector is between 0°C/32°F and 35°C/95°F. Also make sure the projector’s intake and exhaust
openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is
not sucked into the intake openings.
Direction of Air Intake and Exhaust
150 mm (5-29/32˝)
or more
150 mm (5-29/32˝)
or more
150 mm (5-29/32˝)
or more
Operating the Projector Continuously
1. If the projector is to be operated continuously 10 hours or more, lamp replacement cycle duration
becomes shorter.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
Intake
Exhaust
Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to
export control regulations. All other trademarks are the property of their respective trademark owners. Projection images simulated.