Filter
Top Products
ENGLISH-11
Preparation
Notes on use
In order to get the best picture quality
Draw curtains or blinds over any windows and turn off any
fluorescent lights near the screen to prevent outside light or
light from indoor lamps from shining onto the screen.
Do not touch the surfaces of the lens with your bare
hands.
If the surface of the lens becomes dirty from fingerprints or
anything else, this will be magnified and projected onto the
screen. Moreover, when not using the projector, retract the
lens and then cover it with the lens cover.
Screen
Do not apply any volatile substances which may cause
discolouration to the screen, and do not let it become dirty or
damaged.
Lamp
The lamp may need to be replaced earlier due to variables
such as individual lamp characteristics, usage conditions and
the installation environment, especially when the projector is
subjected to continuous use for more than 10 hours or the
power is frequently turned on and off.
Liquid crystal panel
The liquid crystal panel of the projector is built with very high
precision technology to provide fine picture details.
Occasionally, a few non-active pixels may appear on the
screen as fixed points of blue, green or red.
Please note that this does not affect the performance of your
LCD.