Panasonic PT-LM2E Projector User Manual


 
ENGLISH-37
Adjustments and settings
STILL MODE
To reduce flickering of still images (vertical
flicker), set STILL MODE to ON.
SIGNAL MODE
(RGB/YPBPR only)
This displays the type of signal which is
currently being projected.
Refer to the table on page 58 for details on
each type of signal.
sRGB is an international colour reproduction
standard (IEC61966-2-1) established by the
International Electrotechnical Commission
(IEC). If you would like the colours in sRGB-
compatible pictures to be reproduced more
faithfully, make the following settings.
##
Press the
FF
or
GG
button to select
“PICTURE MODE”, and then press the
II
or
HH
button to select “NATURAL”.
$$
Press the STD (standard) button on the
remote control unit.
%%
Press the
FF
or
GG
button to select
“COLOR TEMP.”, and then press the
II
or
HH
button to select “STANDARD”.
STILL MODE OFF
[
ON
NOTE:
BsRGB is only enabled when RGB
signals are being input (when LAMP
POWER is set to HIGH).
NOTE:
BDo not set STILL MODE to ON
when playing back moving images.
Projecting sRGB-compatible
pictures