Filter
Top Products
Technical Information
ENGLISH -
73
Appendix
Mode
Display
resolution *
1
(dots)
Scanning
frequency
Dot clock
frequency
(MHz)
Picture
quality *
2
PnP
Format
H (kHz) V(Hz)
PT-
LW25HU
PT-
LX30HU
PT-
LX26HU
COMPUTER
UXGA 1600 x 1200
75.00 60.00 162.00 A A A ○
C
81.25 65.00 175.50
87.5 70.00 189.00 A A A ○
93.75 75.00 202.50 A A A
WXGA
1280 x 768
47.776 59.870 79.500 A A A
60.289 74.893 102.250 A A A ○
68.633 84.837 117.500
1280 x 800
49.600 60.050 79.360 AA A A
41.200 50.000 68.557 AA A A
49.702 59.810 83.500 AA A A ○
63.980 60.020 108.000
58.289 69.975 98.858
60.044 71.995 102.795
62.790 74.928 106.492
71.553 84.879 122.498
55.993 69.991 94.964
57.675 72.004 97.817
1366 x 768 48.36 60.00 86.67 A A A ○
1360 x 768
47.70 60.00 86.67
56.16 72.00 100.19
1376 x 768 48.36 60.00 86.67
WSXGA+1 1680 x 1050 65.290 59.954 146.250
WXGA+1 1440 x 900 55.935 59.887 106.500
WXGA+2 1440 x 900 74.918 60.000 161.850
WUXGA 1920 x 1200
74.556 59.885 193.250 A A A ○
74.038 59.950 154.000 A A A
“i” added to the resolution value indicates an interlaced signal.*1 :
Picture quality is indicated by the following symbols.*2 :
AA: Maximum picture quality can be obtained.
A: Signals are converted by the image processing circuit.
Note
The number of display dots is 1280x 800 for the PT-LW25HU, and 1024 x 768 for the PT-LX30HU and PT-
z
LX26HU.
A signal with a different resolution will be projected after converting the resolution to match the projector
display.
When interlaced signals are connected, icker may occur on the projected image.
z