Filter
Top Products
- 2 -
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
1. Power Switch (POWER, ON/OFF)
This is a push-push type switch which turns the power of
this monitor on and off.
Press once and the switch remains down (;) for turning
on the power of monitor.
Press again, the switch comes up (l ) for turning off the
power of the monitor.
2. Audio Control Buttons (-AUDIO+)
Press these buttons to increase or decrease the sound
volume level.
3. Menu Button (MENU)
Press to display the setup display or move the cursor
down one line in the setup display.
4. Level Control Button (-LEVEL+)
Press these buttons to adjust level of the selected item in
the setup display, or select a parameter in the setup dis-
play.
5. Power Indicator
Is on when the Monitor’s power is turned on.
6. Audio Output Connector (AUDIO OUT)
The audio input signal connected to the audio input con-
nector u is looped through to this connector.
7. Audio Input Connector (AUDIO IN)
For input of audio signal from an outboard device.
8. Video Output Connector (VIDEO OUT)
The video input signal connected to the video input con-
nector o is looped through to this connector and termi-
nated automatically.
9. Video Input Connector (VIDEO IN)
For input of the NTSC composite video signal from an
outboard device.
10. S-Video Input Connector (S-VIDEO IN)
For input of the NTSC S-Video signal from an outboard
device.
POWER
ON
OFF
–AUDIO+ MENU –LEVEL+
Color Monitor WV-CK1420A
S-VIDEO IN
AUDIO VIDEO
OUT IN
OUT IN