Paradise PD60S Modem User Manual


  Open as PDF
of 4
 
3 OF 4 207822 REV A ECO 15932
Quantum Series
PD60S & PD60SL Modem Redundancy Switch
Fully configurable - only pay for what you need!
Configuration options continue on next page.
Possible modes
SCPC DVB-S2
Description
PD60 Base Switch
z z
BPSK/QPSK/OQPSK, 4.8kbps to 10Mbps, 1bps variable rate, closed network modem.
Ethernet 10/100BaseT on RJ45 for M&C, unaccelerated Ethernet 10/100BaseT on RJ45 via traffic or overhead (Ethernet Bridging)
Includes: Viterbi FEC, Rates 1/2, 3/4 & 7/8 with k=7.
Intelsat Reed-Solomon Outer Codec to IESS 308
Advanced ESC: Variable rate Async channel for Closed Net plus ESC operation.
AUPC: Automatic Uplink Power Control (operates through ESC channel)
Remote Web Browser based monitoring tools (Spectrum Display, Constellation Monitor and link performance versus time) plus SMTP email client for status notification.
DHCP allowing IP address to be allocated dynamically via external DHCP network server
Ethernet header compression of data rates up to 2Mbps
IEEE 802.1p QoS supporting choice of strict priority queuing or fair weighting queuing, IEEE 802.1q VLAN support.
z
50kbps to 10Mbps, 1bps variable rate in DVB-S2 mode, requires a DVB-S2 option
Either IF PD60S
z z
IF Frequency 50-90 MHz & 100-180MHz in 100Hz steps, Closed Network modem, Closed Network plus ESC modem. (hardware option)
or L-band PD60SL
z z
L-band: 950- 1950MHz with 100Hz resolution, includes 4E-8 internal reference (hardware option)
Wideband L-band
z z
Extends L-band coverage to 950-2050MHz in 100Hz steps - L-band option only
Adds Data Rates to 16,896kbps
z z
Extends base operation to 16,896kbps
Adds Data Rates to 25Mbps
z z
Extends 16,896kbps operation to 25Mbps - requires 16,896kbps option
Adds Data Rates to 60Mbps
z z
Extends 25Mbps operation to 60Mbps - requires 16,896kbps & 25Mbps options
IP Acceleration
z z
TCP/IP Acceleration to 10Mbps on base Ethernet port, subject to prevailing data rate limits - overcomes performance problems associated with TCP over satellite
Ethernet Brouting
z z
Ethernet Brouting for Point-to-Multipoint operation when there is a non-satellite return path - can be used with base Ethernet port or IP Traffic card
IP Traffic Shaping
z z
Supports allocation of CIR and BIR plus priority for IP Streams identified by IP Address, Diffserv Class, IEEE 802.1p priority tag or MPLS EXP field. Available as an option on the base IP port
and the IP Traffic card.
Position 2
(must choose 1 option)
hardware option
z z
Blank Panel
z z
IP Traffic card providing TCP acceleration to 16,896kbps, subject to prevailing data rate limits, also provides HTTP Acceleration by prefetching webpage inline objects to reduce webpage
download time
Position 2
IP Traffic card options
z z
Adds TCP acceleration up to 25Mbps on IP Traffic card, subject to prevailing data rate limits - requires IP Traffic card
z z
Adds TCP acceleration up to 60Mbps on IP Traffic card, subject to prevailing data rate limits - requires IP Traffic card and requires 25Mbps Acceleration option
z z
Adds Robust Header Compression to RFC 3059 (IP/UDP) at throughput rates to 29kpkts/s (1-way), 22kpkts/s (2-way), subject to prevailing data rate limits - requires IP Traffic card
z
Encapsulation of IP packets and Ethernet frames over DVB uses MPE or ULE protocols
z z
Adds Dynamic Routing: supports RIP, OSPF and BGP, plus 64 static routes - requires IP Traffic card
DVB-S2 Modulation & Coding
hardware options
z
DVB-S2 CCM Tx - includes QPSK, 8PSK & 16APSK for DVB-S2 use only, includes also DVB-S2 LDPC Error Correction for DVB-S2 only. Must specify IP Traffic card if IP Traffic required
Includes SmartLink allowing SCPC features to be overlaid on DVB-S2 space segment.
z
DVB-S2 CCM Rx - includes QPSK, 8PSK & 16APSK for DVB-S2 use only includes also DVB-S2 LDPC Error Correction for DVB-S2 only. Must specify IP Traffic card if IP Traffic required
Includes SmartLink allowing SCPC features to be overlaid on DVB-S2 space segment.
Low Rate TPC
2nd Generation Turbo
10Mbps maximum
subject to prevailing data rate
limits
z
Rates 5/16, 21/44, 0.493, 2/3, 3/4, 0.789, 7/8 Paradise (low latency) in BPSK, QPSK, OQPSK
Rate 7/8 in QPSK, OQPSK
Rate 0.93 Paradise in QPSK, OQPSK
Rates 3/4, 7/8, 0.93 Paradise in 8PSK - requires 8PSK option
Rates 3/4, 7/8, 0.93 Paradise in 16QAM - requires 16QAM option
High Rate TPC
2nd Generation Turbo
All data rates to 20Mbps
subject to prevailing data rate
limits
z
Rates 5/16, 21/44, 0.493, 2/3, 3/4, 0.789, 7/8 Paradise (low latency) in BPSK, QPSK, OQPSK
Rate 7/8 in QPSK, OQPSK
Rate 0.93 Paradise in QPSK, OQPSK
Rates 3/4, 7/8, 0.93 Paradise in 8PSK - requires 8PSK option
Rates 3/4, 7/8, 0.93 Paradise in 16QAM - requires 16QAM option
Sequential FEC
Limited to 2,048kbps maximum
z
Rates 1/2, 3/4, 7/8 in BPSK, QPSK, OQPSK
FastLink
Low Latency LDPC
z
FastLink LDPC up to 1Mbps, supports BPSK and QPSK, also supports 8PSK - requires 8PSK option, FastLink 8QAM - requires FastLink 8QAM option, and 16QAM - requires 16QAM option
(hardware option)
z
FastLink LDPC extension to 2.5Mbps - requires FastLink LDPC to 1Mbps
z
FastLink LDPC extension to 5Mbps - requires FastLink LDPC to 1Mbps and extension to 2.5Mbps
z
FastLink LDPC extension to 10Mbps - requires FastLink LDPC to 1Mbps plus extension to 2.5Mbps and extension to 5Mbps
z
FastLink LDPC extension to 25Mbps - requires FastLink LDPC to 1Mbps plus extension to 2.5Mbps, extension to 5Mbps and extension to 10Mbps
z
FastLink LDPC extension to 60Mbps - requires FastLink LDPC to 1Mbps plus extension to 2.5Mbps, extension to 5Mbps, extension to 10Mbps and extension to 25Mbps
 previous