Filter
Top Products
13
Table 7. Management – General Configuration Options (1 of 2)
Option Factory 1 Factory 2 Comments/Description
SNMP Mgt:
Disab Disab
Specifies whether the DSU/CSU
responds to SNMP session
SNMP Mgt:
Enab Enab
p
responds to SNMP session
requests.
NMS Valid:
Disab Disab
Specifies whether the DSU/CSU
validates the IP address of an
NMS Valid:
Enab Enab
validates
the
IP
address
of
an
SNMP manager attempting
access.
Num Sec Mgrs:
1
2–10
1
2–10
The number of management
systems authorized to send SNMP
messages to this unit.
NMS
n
IP Adr:
Edit Edit
Specifies the IP address for each
NMS This configuration option is
NMS
n
IP Adr:
Clear Clear
p
NMS. This configuration option is
repeated for all
n
NMSs.
NMS
n
ACS:
Read Read
The type of access allowed for
NMS
n
ACS:
R/W R/W
The
type
of
access
allowed
for
NMS
n
.
System Name:
Edit Edit
The SNMP system name for this
System Name:
Clear Clear
The
SNMP
system
name
for
this
device.
System Location:
Edit Edit
The SNMP system location for this
System Location:
Clear Clear
The
SNMP
system
location
for
this
device.
System Contact:
Edit Edit
The SNMP system contact name
System Contact:
Clear Clear
The
SNMP
system
contact
name
for this device.
CommunityName1:
Edit Edit
A community name that is allowed
access to this device Defaults to
CommunityName1:
Clear Clear
y
access to this device. Defaults to
public
.
Access 1:
Read Read
The type of access allowed for
Access 1:
R/W R/W
The
type
of
access
allowed
for
community name 1.
CommunityName2:
Edit Edit
A community name that is allowed
CommunityName2:
Clear Clear
A
community
name
that
is
allowed
access to this device.
Access 2:
Read Read
The type of access allowed for
Access 2:
R/W R/W
The
type
of
access
allowed
for
community name 2.
IP Adr:
Edit Edit
The IP address needed to access
IP Adr:
Clear Clear
The
IP
address
needed
to
access
the device.
NetMask:
Edit Edit
The Subnet Mask needed to
NetMask:
Clear Clear
The
Subnet
Mask
needed
to
access the device.
Com IP Adr:
Edit Edit
The IP address for the COM port
Com IP Adr:
Clear Clear
The
IP
address
for
the
COM
port
when configured for SNMP.