Filter
Top Products
4 September 2004 6205-A2-GZ40-10
Connecting the Cables
Hardware Connection
Connect the RJ11 telephone cable as shown below.
RJ11 cable to Telephone
Line
USB cable to PC
(connect after driver
installation)
Filter
Connect Line Filter (Optional)
1. Unplug the phone cable from the phone jack of your phone and plug it into the “WALL” jack of the Y-
Line Filter.
2. Plug the ADSL cable into the “ADSL” jack of the Y-Line Filter and the Modem.
3. Plug another phone cable into the “PHONE” jack of the Y-Line Filter and your phone.
Warning: DO NOT CONNECT THE USB CABLE INTO THE UNIT UNTIL
THE DRIVER INSTALLATION IS COMPLETE.