Filter
Top Products
Custom Network Interface Settings
5-3
Issue 1 September 1994
Table 5-1. Custom Window Fields (2 of 2)
IP Internet Protocol address (home address) for the
workstation.
Domain Not required.
Configuring LAN Hardware
Parameters
Use Hardware... to select and configure the following
hardware-related parameters for Ethernet, Token Ring, or FDDI
networks:
Vendor
Board Type
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Hardware... from the Setup menu. The
Hardware dialog box appears, as shown in Figure 5-2.