Filter
Top Products
15
Default Settings
SHDSL Parameter Defaults
T1 Uplink Parameter Defaults
Table 1. SHDSL Defaults
Parameter Default
Backbone-VLAN 0 (off)
Circuit Identification n/a (no default)
Flood Uplink
IP Range 1 0.0.0.0 – 255.255.255.255
IP Range 2 0.0.0.0 – 0.0.0.0
Protocol All
Speed 272 kbps
VLAN Priority 0 (none)
VLAN Range 0 - 0 (off)
Table 2. T1 Defaults
Parameter Default
Frame Type Extended Super Frame (ESF)
Line Attenuation 0 dB
Line Code Bipolar with 8 Zero Substitution (B8ZS)
Speed* n/a (T1 uplink speed is determined via communication with the
remote T1 provider equipment to which the SMD2000-24T is
connected)
Timing*
* Speed and timing are non-configurable parameters for the SMD2000-24T T1
uplink ports.
Loop