Filter
Top Products
6 CopperLink 2300 Quick Start Guide
Note PoE referenced in Figure 6 applies to Ethernet 0/3 only.
2.4 Connect the Power Source
The Long Range Ethernet Extender does not have a power switch; it powers on once the device is plugged in.
The power connection is made via the barrel jack on the rear panel of the CL2300. No configuration is necessary
for the power supply.
2.5 Router/Bridge Status LEDs
The LEDs indicate the status of power, the WAN (CopperLink) PoE, and Ethernet connections.
Note When powered down, the LED indicators are clear; when powered on, the LED indicators are yellow.