Patton electronic 2616RC Network Card User Manual


 
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Phone +1-301-975-1000
Fax +1-301-869-9293
E-mail sales@patton.com
Web www.patton.com
07MD2616RC-DS2
Streamline, optimize, and save!
Patton is a registered trademark and IPLink is a trademark of Patton Electronics Company in the
United States and other countries.
Specifications
• Any-to-any DS0 cross-connection & concentration
• Non-blocking ingress & egress aggregation
• Redundant failover
nxT1/E1 connections
from multiple sources
DS0s groomed over
user-defined egress
T1/E1
T1/E1
Model 6676
Using the flexible 2616RC’s DS0 switching
matrix, Service Providers can easily consoli-
date, manage, and provision up to 96 T1/E1
links from a single 6476 (4U) chassis. Uplink
access costs are significantly reduced by
grooming and aggregating DS0 traffic from
many partially used T1/E1 lines into selected
outgoing T1/E1 or STM-1 links.
Here is how it works:
Each 2616RC comes with 16 T1/E1 ports;
you select which timeslots connect to
downstream or upstream lines.
Based on customer requirements, assign
nx64 kbps timeslots to downstream
T1/E1 links, i.e 256 kbps (4 DS0s), 512
kbps (8 DS0s), 1024 kbps (16 DS0s), etc.
Use the 2616RC GUI to map DS0s from
downstream to upstream lines.
For example:
4 DS0s from port 1
8 DS0s from port 2
16 DS0s from port 3
3 DS0s from port 4
All mapped to upstream E1
port 5 (31 DS0s).
16 configurable WAN ports: T1 (AMI/B8ZS line coding) or
E1 (HDB3/AMI line coding), G.703, G.704, G.723
10/100BaseT (RJ-45 connector); auto-negotiating; half or
full duplex operation for management
Internal or Network (from T1/E1 WAN port)
Indicators LEDs for power, CPU, system, Ethernet, External
clock, Test mode, and WAN ports frame and error status
HTTP, SNMP, Telnet Ethernet, RS-232 Console Port, SYS-
LOG Client, Software upgrade via FTP
Configurable alarms; Remote SNMP Traps; Front Panel LEDs
Master and slave clocking sources are user-selectable and
can be derived from other system cards in the chassis
Redundant, high speed, packet switched bus (PSB) and
TDM bus supporting 4096 DS0s
Safety: UL/CSA per UL1950 Canadian per CS-03. RTTE
Directive 99/5/EC, Environment FCC Part 15,CE Mark,
CTR12, CTR13, FCC Part 68
Operating temperature: 0–40°C (32–104 °F)
Humidity: 5–90% non-condensing
Front blade:0.75 H x 10.5 W x 6.3 D in.
(1.9 H x 26.7 W x 16.0 D cm)
Rear blade: 0.75 H x 10.5 W x 3.15 D in.
(1.9 H x 26.7 W x 8.0 D cm)
WAN Ports
Ethernet Ports
WAN Clocking
Front Panel Indicators
Management Services
Alarm Reporting
System Clocking
High Speed Midplane
Compliance
Environment
Dimensions