Filter
Top Products
6
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
One Year parts and labor. If any questions or problems arise during
installation or use of this product, please do not hesitate to contact Pat-
ton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Terminates G.703 and G.704, E1/fractional E1 service
• Available in low-cost standalone or rack-mountable versions
• n x 64 kbps data rates to 2 Mbps
• X.21, V.35, and EIA-530
• Switch-selectable AMI or HDB3 line encoding options
• Switch-selectable DTE/DCE modes for X.21 version
• 75-ohm dual coax and 120-ohm twisted-pair G.703 connections
• Local and remote loopback diagnostics
• Internal, external, and G.703 network timing
• CE and BABT approvals
• 100–240 VAC and 48 VDC power options
• Conforms to ONP requirements CTR 12 and CTR 13 for connection to
international Telecom networks
2.2 DESCRIPTION
The Model 2701 receives channelized G.704 (n x 64 kbps) or clear chan-
nel E1/G.703 (2.048-Mbps) data from the Telco’s digital data network.
The Model 2701 terminates the G.703 telco interface and converts the
data for transmission to a user-oriented serial [X.21, V.35, and EIA-530
(V.36/RS422)]. The 2701 can connect to a Router, FRAD, PABX or Multi-
plexer over its serial interface at nx64kbps data rates up to 2.048 Mbps.
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
One Year parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at (301) 975-1007.