Filter
Top Products
2
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions arise during
installation or use of the unit, contact Patton Electronics Technical
Support: (301) 975-1007; http://www.patton.com; or,
support@patton.com.
2.1 FEATURES
• Can handle large surges caused by storms, power outages, etc.
• Conforms to the IEEE 802.3 specification
• Provides separate connection to chassis ground for surge handling
• Easy to install
• Made in the U.S.A
2.2 DESCRIPTION
LANs are naturally susceptible to a host of lethal transient
voltages, according to the IEEE 802.3 specification (see paragraph
8.7.2). That's why we designed the Model 531 series LAN surge
protectors.
The Model 531 connects directly between incoming ThinNet data
cables and LAN I/O ports. By shunting all threatening voltages to the
chassis ground, the Model 531 ensures the integrity of the data in your
LAN and protects connected equipment from lightning induced
energies, AC power induction, electrostatic discharges and ground
potential differences.
Warning: This product will not provide complete protection should your
equipment or building be subject to a direct lightening hit.
1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 531 components to be free
from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or
consequential damages arising from the use of or inability to use this
product. Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.
1.2 SERVICE
All warranty and nonwarranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support: (301) 975-1007. Notice: Packages received without
an RMA number will not be accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Patton Model Patton Model 531. Technical Service hours: 8AM to
5PM EST, Monday through Friday.
1