Filter
Top Products
VDSL line interface
Ethernet interface
POTS/ISDN interface
Protocol
Modulation
Duplexing Method
Frequency Range
Transmission
Surge suppression
Front Panel Indicators
VDSL technology (very high bit-rate digital subscriber line)
allows for the simultaneous transmission of voice, data, and
video on standard existing phone-grade copper wire. VDSL is
the fastest DSL technology currently available. Depending on
the intended applications, VDSL can be configured for symmet-
rical or asymmetrical operation. VDSL’s high bandwidth allows
for applications such as high-definition television, video-on-
demand (VOD), high quality video conferencing, medical imag-
ing, fast Internet access, and regular voice telephone services
all over a single voice-grade twisted pair. Achievable VDSL dis-
tances may vary depending on data rate, gauge/type of wire,
and noise/cross-talk environment.
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Phone +1-301/975-1000
Fax +1-301/869-9293
E-mail marketing@patton.com
URL: www.patton.com
07M1058-DS2
RJ-45 (pin 4 = ring; pin 5 = tip) and two-position removable
terminal block (supports 19-26 AWG or 0.9-0.4 mm wire)
8-position shielded RJ-45. Auto-sensing 10/100Base-T with
half or full-duplex operation
RJ-45 (pin 4 = ring; pin 5 = tip)
Transparent to high layer protocol. Supports 802.1Q VLAN
tagging
QAM (Quadrature Amplitude Modulation)
FDD (Frequency Division Duplexing)
VDSL: 1–8 Mhz; POTS/ISDN: 0–120 kHz
VDSL line rate: 12.5 Mbps; Data rate: 10 Mbps full-duplex
VDSL line maximum current surge: 20kA (8/20µs) gas tube
Power, VDSL Link and QOL (quality of link), Ethernet Link and
Activity Status
What is VDSL?
External AC and DC options: 120VAC, and universal input
(UI)—100–240 VAC, or DC-48 VDC, -24 VDC, and -12 VDC
FCC Part 15A and Part 68A & B (1058DV version only), CE Mark,
EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
Temperature: 32–122°F ( 0–50°C)
Humidity: Up to 90% non-condensing
Standalone
1.5H x 4.13W x 3.75D in.
(3.81H x 10.5W x 9.53D cm);
Rack Card
3.0H x 0.83W x 7.84D in
(7.6H x 2.1W x 19.9D cm)
Standalone 0.4 lbs (0.18 kg) without power suppply; Rack card:
0.3 lbs (0.14 kg) with rear card
Power Supply
Compliance
Environment
Dimensions
Weight
Used in pairs (Central Office and Customer
Premise), the Model 1058 establishes a high-
speed, line sharing, symmetrical 12.5 Mbps
voice and data link. The Model 1058 inter-
connects two geographically separated LANs
over a single pair of voice-grade wire.
Operation is simple: packets destined for the
remote LAN are sent transparently, at full
line rate, to the peered LAN. The Model
1058DVs built-in POTS/ISDN splitter allows
users to simultaneously use the phone or fax
machine, while surfing the web, downloading
files or receiving e-mails.
-40
-60
-80
0 <0.12 0.2 1.1
20 30
VDSL Frequency Range
POTS, ISDN
PSD, [dBm/Hz]
F, MHz
Frequency Division Multiplexing (FDM) allows one pair of wires to simultaneously
transport data (VDSL) and voice (POTS/ISDN) traffic. The lower frequencies are
reserved for voice (POTS/ISDN) and the higher frequencies for data (VDSL)
Application: LAN Extension