Filter
Top Products
Message Description/Action
Head open. The ribbon is improperly
positioned.
Reposition the cassette
or ribbon loading device
so it is firmly seated.
Close the print head.
Hot head. The print head is too hot
to operate. This is
normally due to continual
printing of formats with a
lot of printed data (more
than 30% of the tag
contains print).
Let the printer cool
before continuing.
Insufficient memory. There is not enough
memory available for the
item you are trying to
store.
Delete formats or
batches to free memory.
Knife jam. The knife is jammed or
blocked, or you are
attempting to cut supply
that is smaller than 1.2
inches.
Clear the knife, then try
to print again. If supply
is too small, press to
override the message
and load the correct
supply before attempting
to print.
Operation Messages
4. Operation Messages
4-5