Filter
Top Products
3-26 System Administrator’s Guide
2. Press A under ↵ to save the setting.
3. Press F until you return to the Setup menu.
Shut Down
You can set the printer to automatically shut down after a selected period
of time. Enabling the Shut Down option will turn off the printer
completely after the selected time period.
The default is disabled (the printer does not automatically shut down).
However, you can set the printer to go shut down from 10 minutes up to
30 minutes
1. From the Setup menu, select Power Mgmt, Shut Down.
Disable
10 Minutes
↵ d
Make your selection: Disable, 10 Minutes, 20 Minutes, or 30
Minutes. For example:
Shut Down
20 Minutes
↵
2. Press A under ↵ to save the setting. The printer will shut down after
20 minutes.
3. Press F until you return to the Setup menu.
RF Network
If you have a network printer, refer to the SNP System Administrator’s
Guide available on our Web site (www.paxar.com) for information about
configuring your RF settings using your network printer.
If your printer is not an RF printer and you try to access the RF Network
menu, "Not available" appears on the display.