Filter
Top Products
- 4 -
INSTALLATION
Installation of the USB Hub is easy. Self-
Powered mode is available for you to install the
USB Hub. Each downstream port is 500mA
(max) supplied. This power is sufficient enough
to support most of the USB devices.
1. Plug the DC end of the power adapter into
the DC jack of the Hub.
2. Plug the AC end of the power adapter into
an electronic outlet.
3. Plug the B-type plug of USB 2.0 cable into
the “upstream port” of the Hub.
4. Plug the A-type plug of USB 2.0 cable into
the PC site.