Filter
Top Products
ISSUED: 08-15-07 SHEET #: 055-9188-8 06-04-11
Visit the Peerless Web Site at www.peerlessmounts.com
10 of 13
For customer care call 1-800-865-2112 or 708-865-8870.
Cable Management
To make an opening to route cables through
projector mount assembly, adjust projector
mount assembly to full upward tilt position by
turning knob for tilt adjustment as shown in fi g-
ure 8.2. Left or right roll position can be adjusted
if more space is required.
NOTE: Be certain tamper resistant screws are
not engaged before making adjustments (see
step 9).
Route cables through top of extension column
as shown in fi gure 8.1 and fi gure 8.2.
NOTE: A method for assisting cables through
extension column may be required (example:
string tied to connector to help pull through
extension column).
Route cables through projector mount assembly
as shown in fi gure 8.2 and connect to projector.
8
DO NOT
CRIMP
WIRES
BEND WIRES OF RCA
PLUGS IN OPPOSITE
DIRECTION
NOTE: INNER DIAMETER OF
EXTENSION COLUMN MAY NOT
ALLOW PASSAGE FOR ALL
CONNECTOR TYPES.
ROUTE
CONNECTOR
THROUGH
FIRST
CABLES WITH COMBINATION
OF VGA CONNECTOR
AND RCA PLUGS
INNER
DIAMETER OF
EXTENSION
COLUMN
CABLE
CONNECTOR
fi g. 8.1
fi g. 8.2
EXTENSION
COLUMN
OPENING FOR
ROUTING CABLES
SCREWS FOR ROLL
ADJUSTMENT
SCREWS FOR PITCH
ADJUSTMENT