Filter
Top Products
18 Pelco Manual C1900M (4/99)
7.0 MAINTENANCE
• Remove dust or dirt on the surface of the lens or
CCD with a blower.
• Use a soft, dry cloth to clean the body. If it is very
dirty, use a cloth dampened with a small quantity
of a neutral detergent, then wipe dry.
• Avoid using volatile solvents such as thinner, al-
cohol, benzene, and insecticides. They may dam-
age the surface finish and/or otherwise impair the
operation of the camera.
8.0 SPECIFICATIONS
Image Device: 1/3-inch Interline transfer type CCD
Sensing Area: 1/3-inch format (3.3 x 4.4 mm)
Effective Picture
Elements:
CC3300-2: 510 H x 492 V
CC3300-2X: 500 H x 582 V
CC3300-3: 500 H x 582 V
Horizontal
Resolution: 330 TV lines
Minimum
Illumination: 1.0 lux at f/1.2 (Turbo AGC on)
CCD Iris:
CC3300-2: 1/60 to 1/100,000 second
CC3300-2X: 1/50 to 1/100,000 second
CC3300-3: 1/50 to 1/100,000 second
CCD Iris Control: ON/OFF switchable
Lens Type: VIDEO/DC servo switchable
Power Requirements:
CC3300-2: 24 VAC, 60 Hz
CC3300-2X: 24 VAC, 50 Hz
CC3300-3: 220-240 VAC, 50 Hz
Power Consumption:
CC3300-2: 3.5 W
CC3300-2X: 3.5 W
CC3300-3: 4 W
Sync System:
CC3300-2: AC line lock 60 Hz
CC3300-2X: AC line lock 50 Hz
CC3300-3: AC line lock 50 Hz
AGC: ON/OFF/Turbo switchable
Signal System:
CC3300-2: NTSC color system
CC3300-2X: PAL color system
CC3300-3: PAL color system
White Balance: ATW only
Video Signal: 1.0 volt peak to peak at 75 ohms, sync
negative