Filter
Top Products
4 Pelco Manual C1909M (4/01)
DESCRIPTION
The PMC9A is a high-resolution, 9-inch (23 cm) color monitor. The unit has a resolution of
300 TV lines producing an excellent-quality picture. The monitor’s power input of 100-240
VAC, 50/60 Hz, is automatically detected upon power up. All image adjustment controls are
conveniently located on the front panel of the monitor.
INSTALLATION
The monitor may be placed on any flat surface (desk or
table) or rack-mounted. To rack-mount the monitor follow the
instructions supplied with the rack-mount kit.
1. Video Cable Connection (refer to Table A).
a. Connect the video cable to the BNC video input
labeled VIDEO A IN on the back panel of the
monitor. If the installation requires a second video
input, connect a video cable to the BNC video
input labeled VIDEO B IN.
b. Looping Operation Only – Connect a video cable
to the BNC connector labeled VIDEO A OUT. If the
installation requires a second video output,
connect a video cable to the BNC video output
labeled VIDEO B OUT. Refer to Figures 2 and 3.
2. Plug the power cord (provided) into the AC INLET con-
nection on the back panel. Plug the other end of the
cord into a power receptacle.
Figure 1. Back Panel Layout
NOTE:
If using S-Video
connect the video cable to
the input labeled S-VHS IN.
IN
OUT
AUDIO
2
S-VHS IN
OUT
IN
VIDEO B
OUT
IN
VIDEO A
AUDIO
1
00595