Pelco C579M Switch User Manual


 
PROGRAMMING AND CONFIGURATION CM9760-SAT 2-21
3.4 ALARMS FILE
In addition to the previous files, it may also be necessary to configure an alarm file if you want to set up the system for head-end alarm
notification. Triggered alarms on the SAT SIDE result in a series of events, controlled, in part, by the programming of the ALARM file on the
9760 SIDE of the configuration. Figure 3-9 is an example ALARM file configured for just one alarm. All 16 SAT alarms can be configured if
you want. Additional configuration files may have to be edited to set up your system to meet other specific operational needs. Suggestions and
additional considerations, as well as alarm operations, are discussed in Section 3,
3.2 9760-SAT Alarm Response
. Note Figure 3-18. Each
keyboard operator must be assigned alarm monitors on which to view any activated alarms.
Figure 2-9
Alarm File