2 C655M-A (1/07)
Important Safety Instructions
Observe the following WARNINGS before installing and using this product.
1. Installation and servicing should be done by qualified service personnel only and conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and must not be
installed where exposed to rain and moisture.
3. Only use replacement parts Pelco recommends.
4. After replacing/repairing this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the
exposed parts have not been connected to line circuitry.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
DESCRIPTION
The MCS*E Series consists of multi-output 24 VAC indoor power supplies. These power supplies provide output for 4, 8, or 16 cameras from a
single source and come in 2, 5, 10, and 20 amp capacities. The power supplies allow for 120 VAC line input. Higher capacity models can handle
pan and tilt and receiver operation, in addition to the camera, for integrated systems such as Spectra
®
and Esprit
®
All MCS*E Series models come with an individual glass fuse for each output channel.
MODELS
Model
Number
Outputs
Total Output
Current (Amps)
Total Output
Power (VA)
Max Current Per
Output (Amps)
Max Power Per
Output (VA)
Input Current
(Amps)
Output Voltage
(VAC)
Fuses
Surge
Protection
On/Off Switch
Power LED
MCS4-2E 4 2 48 1 24 0.44 24 X X X X
MCS8-5E 8 5 120 3 72 1.1 24 X X X X
MCS16-10E 16 10 240 3 72 2.2 24 X X X X
MCS16-20E 16 20 480 3 72 4.4 24 X X X X
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.