Filter
Top Products
Pelco, Inc. Worldwide Headquarters 3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc. ©Copyright 2009, Pelco, Inc. All rights reserved.
REPLACING A REAR CHASSIS FAN (NSM5200 ONLY)
The NSM5200 has two rear chassis fans that are located on the rear panel of the unit. These fans are hot-swappable and can be replaced without turning
off the unit. A red light indicates a fan failure.
1. Turn the two captive thumbscrews counterclockwise to remove the failed rear-chassis fan (refer to Figure 2).
2. Pull the failed fan completely out of the unit.
Figure 2. Replacing a CPU Fan
3. Gently slide the replacement fan into the empty slot.
4. Turn the captive thumbscrews clockwise to secure the replacement fan.
REVISION HISTORY
Manual # Date Comments
C4612M 10/09 Original version.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.