Filter
Top Products
C2647M (10/06) 7
INSTALLING A HARD DISK DRIVE
1. Follow the instructions at Preparing the Unit to Install a Drive on page 6 to open your unit.
2. Locate the hard disk drive cage in the front of the DVR.
Figure 6. Locating the Hard Disk Drive Cage
3. To remove a hard disk drive do the following:
a. With a Phillips screw driver, remove and set aside the two screws that secure the cage in place along the
bottom of the chassis.
Figure 7. Loosening the Hard Disk Drive Cage
WARNING: Install only hard disk drives received from the Pelco factory.
Any video on the hard disk drive will be lost when the drive is replaced. If possible, export important
video recordings before you replace a hard disk drive. Follow the instructions for exporting video in the
operation manual.