Filter
Top Products
10 C1631M-A (9/05)
ATTACHING RAILS TO AN EPS5000-300
The rails give the EPS5000-300 more support for rack mounting, especially in deeper racks. To attach the rails, follow these steps and refer to
Figure 7.
1. Secure the two brackets to the back of the EPS5000-300 with the four supplied 6-32 x 0.375-inch screws.
2. Place the rails on the sides of the EPS5000-300 to a desired length.
3. Secure the rails and plates to the brackets using the eight supplied 8-32 x 0.625-inch screws and washers.
4. Secure the rails to the rack with four of the supplied 10-32 x 0.750-inch screws and washers.
NOTE:
The illustration below shows the attachment of one rail only. The steps for attaching the second rail are the same.
Figure 7.
Attaching Rails
8-32 x 0.625
6-32 x 0.375
RAIL
PLATE
BRACKET
10-32 x 0.750