Filter
Top Products
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
Installing Lights for the first time
Have the Powerline Interface module ready to connect to COM 1 port on the
ScreenLogic Video & Lighting Protocol adapter during the program installa-
tion setup. Each light switch must be setup one at a time.
To install the PCS Light switches:
1. Click the ScreenLogic Connect icon on your desktop. The
following screen will be displayed.
2. Be sure that the Video & Lighting adapter is selected and is populated
in the system name field.
3. Click the
Configure ScreenLogic
button.
4. Click the Configure Lighting button
to configure the lights.
10
WARNING - All switches work must be installed by a licensed
electrician, and must conform to the National Electric Code and all
national, state, and local codes.
System name xx-xx-xx
ScreenLogic system
password
ScreenLogic Video &
Lighting Protocol
Adapter address
Note: PCS light switches are compatible with incondescent light bulbs only. Lights
with florescent light bulbs cannot be used.