Filter
Top Products
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide
Using the Video Camera Interface
The ScreenLogic Video & Lighting Protocol Adapter supports up to four video
cameras. Each camera can be accessed by clicking the camera’s name tab at
the bottom of the Video screen. Each camera has its own set of controls.
Camera controls include:
• Full Screen: Monitor in full screen mode
• Low, Med, High: Set the camera resolution
• 1,2,3,4,5,6,7,8: Preset camera positions (This feature is not supported
on the BL-C1A camera)
• (-) (+) : Camera zoom out (-) and in (+) out *
• Click inside the image to center the camera to that point *
• Navigation Controls: Move camera up, down, left and right *
• Installed camera(s): Click on the tab along the bottom of the screen to
access the camera(s).
Note: (*) This feature is not supported on all cameras.
9
Note: Available camera controls will vary by camera.