Pentax PocketJet 3 Printer User Manual


 
about 0.27” and 0.06”, respectively. Printable width is set to
8.16” with 0.17” margins on either side.
‘A4’ size assumes an 8.27 x 11.7” (210 x 297mm) in page, and sets
a total printable height of 11.36” (299.4mm), and top and
bottom margins of about 0.27” (6.8mm) and 0.06” (1.7mm)
respectively. Printable width is set to 8.0” (203.2mm) with
0.13” (3.4mm) margins on either side.
‘Custom’ size allows the setting of length of the form, bottom
margin, and left and right margins using those commands.
Bottom Margin:
This setting will modify the bottom margin when ‘Page Size’ is
set to ‘Custom’.
‘Lines’ allow you to set a bottom margin equal to the height of a
specific number of text lines. The actual space that is left
depends upon the current setting of the ‘Text Line Spacing’
setting. For example, if ‘Text Line Spacing’ is set to 1/6”, and
the ‘Bottom Margin’ is set to ‘4’ lines, 2/3” of blank space will
be created at the bottom of each page.
The minimum and ‘default’ space between pages will depend
upon the setting of the ‘Text Line Spacing’, but is a minimum
of ½”. For 6 lines per inch, the minimum is 3 lines; for 8 lines
per inch, 4 lines; for 8 lines per inch at 0.12” spacing, 5 lines.
Note that if the “Form Feed Mode” is set to “No Feed”, the
bottom margin will be forced to “0” lines as a reminder that no
margin can be set and none will be produced.
The maximum setting is the ‘Form Length’ in lines – 1.
Page 14