Filter
Top Products
Applications
2.28
— IOLINK-520 & IOLINK-PRO Installation & Applications Guide
1 b) Defining this remote site profile within the IP Address connect table, which will
cause a call to be made when a packet for this IP address is routed,
Location: Main
!
Configuration
!
Connections up
!
IP Address Connect
!
IP Address Connect
Enabled
1 c) Defining the Auto-Call option within the Edit Remote Site menu of this remote site
profile. (The Auto-Call option causes the IOLINK router to attempt to establish a
connection to this remote site profile each time the IOLINK router starts up.)
Location: Main
!
Configuration
!
Connections up
!
Remote Site Set-up
!
Edit Remote Site
!
Connection Set-up
!
Auto call
Enabled
1 d) Setting up an activation schedule with times the connection is to be activated and
deactivated
Location: Main
!
Configuration
!
Connections up
!
Remote Site Set-up
!
Edit Remote Site
!
Activation
!
Schedule
Activation intervals
1 e) If a second ISDN channel is available and traffic level is enabled, setting the traffic
load at which the second channel is to be activated.
Location: Main
!
Configuration
!
Connections up
!
Remote Site Set-up
!
Edit Remote Site
!
Activation
!
Threshold
Up Threshold
Down Threshold
Up Stability timer
Down Stability timer