Filter
Top Products
Perle S- 10G Media Converter Installation Guide
14
Module Temperature Protection
Every S-10G comes equipped with an internal fan to provide
cooling to the unit. However, if any of the modules are operating
above their specified maximum operating temperature, the S-10G
will reduce the power to these modules. The S-10G will continue
to monitor the operating temperature of the unit until the
temperature is below the maximum operating temperature and
then the S-10G will return the modules to normal operating.
Loopback Auto Detect
Perle S-10G media converters have the ability to automatically put
remote Perle S-10G media converters in loopback mode. This
allows the remote S-10G media converter to be located in distant
or inaccessible locations. The remote S-10G will remain in
loopback mode as long as the tests are in progress.
Note: Depending on the manufacturer some copper cabling may not
support our Loopback Auto Detect feature, however Loopback Mode can
always be obtained by setting switch 2 to the down position on your
Perle Media converter.