Philips 105B20 Computer Monitor User Manual


 
• Tube type
Shadow mask, flat square, high contrast, anti-glare, anti-static,
anti reflection, light transmission 57%
• Phosphor P22
• Recommended display area 10.6" x 7.95" / 270 x 202 mm
• Maximum display area 11.2" x 8.4" / 284 x 213 mm
SCANNING
• Horizontal scanning 30 - 61KHz
• Vertical scanning 50 - 120 Hz
VIDEO
• Video dot rate 108 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2 kOhm
• Input signal levels 0.7 Vpp
• Sync input signal
Separate sync
Composite sync
• Sync polarities Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 K degrees x = 0.283 / y = 0.297
• at 6500 K degrees x = 0.313 / y = 0.329
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or
other input device is detected, the monitor will automatically "wake up". The following table shows the power
consumption and signaling of this automatic power saving features:
Power Management Definition
105S Product Information
file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/105S/PRODUCT/PRODUCT.HTM (2 of 4) [8/29/2001 2:41:18 PM]