Filter
Top Products
When pressing any function pad, the "Shift" LED will flash once
to indicate the function has been selected.
1.
Once the limit of the adjustable range has been reached, the shift LED will flash
continuously.
2.
RETURN TO TOP OF THE PAGE
Adjustment
For Tne monitor is pre-set with 6 modes for optimal display size and centering as indicated in the following
table:
Mode Resolution
(dots x lines)
Horizontal
Freq. (KHz)
Vertical
Freq. (KHz)
Remark
VGA 600 X 400 31.5 70 Non-interlaced
VGA 600 X 480 31.5 60 Non-interlaced
VESA / 75 600 X 480 37.5 75 Non-interlaced
VESA / 75 600 X 480 46.9 75 Non-interlaced
VESA / 85 800 X 600 53.7 85 Non-interlaced
VESA 1024 X 768 48.3 60 Non-interlaced
(A) User mode: (10 modes)
The set will save the user's setting parameters automatically.
After 10 seconds of key-pad inactivity, the LED will flash twice to
indicaate the parameters being saved.
●
Press to recall factory preset mode. (at second level)●
RETURN TO TOP OF THE PAGE
Front Controls
file:///D|/EDFU/LF3/lf3manual/english/Install_1/FRONT/Front.htm (3 of 3) [2003/3/27 ?? 10:40:35]