Filter
Top Products
Suspended = The icon has a yellow center with a red cross.
Notes
An active window must be 100% visible, i.e. it must be on top of all other windows or areas. If any part of
another window or area overlaps a highlighted window, LightFrame™ automatically suspends operation.
That means the icon goes from a green center to a yellow on with a red cross and the feature ceases. Once
that window or area is removed and the original highlighted window is on top again, LightFrame™
automatically re-engages and the icon regains its bright green center.
An active window must also be 100% on the monitor 's viewing area. If part of a highlighted window moves
off the monitor 's viewing area, LightFrame™ automatically goes into the Suspended mode. If part of a
window is off the viewing area, you will not be able to use LightFrame™ on that window.
Only one window or area at a time can be highlighted.
How To Activate LightFrame™
Click on the LightFrame™ icon in the systemtray (the area to the far right in the taskbar). . The icon
will turn from gray to a green center.
1.
Guide the mouse to the window you want displayed. As you move the mouse, the cursor changes to
a small arrow with a light bulb.
2.
3a) Click on the window you want to have highlighted. The brightness and sharpness are
automatically adjusted.
3b) If you want to highlight only an area of a window, click on the left mouse button and drag the
cursor over the area to be highlighted while holding the mouse button. A rectangle forms around the
area. When the area is encompassed by the rectangle, release the mouse button and the area
becomes highlighted.
3.
How to Deactivate LightFrame™
To deactivate, click on the LightFrame™ icon in the System Tray of the Taskbar. The light in the middle of
the icon turns gray and LightFrame™ is deactivated.
Note
If a highlighted window is closed before LightFrame™ is deactivated, LightFrame™ is automatically
deactivated.
Right-Click Features
On the LightFrame™ icon in the taskbar, click the right-side mouse button to bring up a menu from which
you can select:
About...which tells you something about LightFrame™
Help which takes you to the Help screen where you can find additional information
Exit which exits the LightFrame™ Program.
If you select exit and the color in the center of the icon is green, it will turn gray and LightFrame™ is
deactivated. If you select exit an Exit message appears asking you if are sure you want to exit. Select "Yes "
to exit or "No " to abort the exit. If you select Yes, you can always restart LightFrame™ by clicking on the
desktop shortcut icon.
LightFrame™ is Suspended When . . .
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (3 of 7) [10/12/2000 2:00:19 AM]