Philips 200P3M Computer Monitor User Manual


 
VIDEO
• Video dot rate 202 MHz
• Input impedance
- Video 75 ohm
- Sync 2K ohm
• Input signal levels 0.7 Vpp
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polarities Positive and negative
• S-Video Y input 1.0Vpp, C input 0.3Vpp, 75ohm input impedance
• CVBS Composite, 1.0Vpp, 75ohm input impedance
•Video interface
Triple input(two connectors): D-Sub(analog) and DVI-I(accepts
both digital and analog) are available and user selectable
S-Video & CVBS
AUDIO-IN
• Input signal level 0.7 Vpp
• Headphone out signal level
32 20+20mW
• Input signal connector 3.5mm mini jack
• Loudspeaker
4W Stereo Audio (2W/channel RMSx2, 200Hz-12kHz, 4
ohm,THD=10%)
MICROPHONE
• Sensitivity -45dB re 1V/Pa at 1kHz
• Output impedance
2.2K max.
• Directivity -5dB at 180°
• Frequency range 300Hz-3kHz
Optical characteristics
• Contrast ratio: 300 (typ.)
• Brightness:
250 cd/m
2
(typ.)
• Peak contrast angle 6 o'clock
• White Chromatcity:
x: 0.281 y: 0.311 (at 9300°K)
x: 0.312 y: 0.338 (at 6500°K)
200P3M/200P3G Product Information
file:///D|/K1/english/200p3mg/product/product.htm (2 of 7) [3/26/2003 11:04:28 AM]